UV-IR Flame Detector

UV/IR Flame detector
รายละเอียดสินค้า
AW-FD703E-UVIR2 
Explosion-proof Combined Ultraviolet and infrared flame detectorAsenware explosion-proof series flame detector provides a new generation of flame detection capability and technical standards, the flame detectors using a specially designed narrow-band IR sensor pie...
 
Built-in high speed, low power consumption, high performance 16-bit high-precision data processing chip.
 

Using patent narrow-band IR sensor and solar blind UV sensor.

The improvement of the algorithm improves the ability of flame detection and false alarm.

Explosion-proof design is suitable for the hazardous locations of industrial site.

Multistage sensitivity for more occasions.

Can detect small fire much earlier.

Low maintenance cost, easy to update and improvement.

Detection Angle of 120 degrees.

Detection range up to 60 meters.

Suitable for heavy industrial applications.

Detector is suitable for a variety of fuel.
 


Explosion-proof Three infrared flame detector
รายละเอียดสินค้า
AW-FD704E-IR3
Explosion-proof Three infrared flame detector
  1. Asenware explosion-proof series flame detector provides a new generation of flame detection capability and technical standards, the flame detectors using a specially designed narrow-band IR sensor pie...
     
    Asenware explosion-proof series flame detector provides a new generation of flame detection capability and technical standards, the flame detectors using a specially designed narrow-band IR sensor pieces and solar blind type UV sensor pieces., through the built-in 16-bit microprocessor and patent signal processing algorithms, the flame detectors can distinguish more effectively between the real flame radiation and interference sources. Also significantly reduce the effects of environmental factors on the detectors. The flame detectors can be set up 5 sensitivity level, can meet the different needs of more occasions.

    Asenware explosion-proof flame detector series is on the basis of original flame detector, through the market research and collect customer feedback information, and a lot of experimental data, the flame detector’s hardware circuit and software algorithm are improved.
     
    Built-in high speed, low power consumption, high performance 16-bit high-precision data processing chip.
  2.  
  3. Using patent narrow-band IR sensor and solar blind UV sensor.

  4.  
  5. The improvement of the algorithm improves the ability of flame detection and false alarm.

  6. Explosion-proof design is suitable for the hazardous locations of industrial site.

  7. Multistage sensitivity for more occasions.

  8. Can detect small fire much earlier.

  9. Low maintenance cost, easy to update and improvement.

  10. Detection Angle of 120 degrees.

  11. Detection range up to 60 meters.

  12. Suitable for heavy industrial applications.

  13. Detector is suitable for a variety of fuel.
     

AW-FD701E-UV Explosion-proof Ultraviolet
รายละเอียดสินค้า
AW-FD701E-UV Explosion-proof Ultraviolet Flame Detector
explosion-proof series flame detector provides a new generation of flame detection capability and technical standards, the flame detectors using a specially designed narrow-band IR sensor pieces and solar blind type UV sensor pieces., through the built-in 16-bit microprocessor and patent signal processing algorithms, the flame detectors can distinguish more effectively between the real flame radiation and interference sources. Also significantly reduce the effects of environmental factors on the detectors. The flame detectors can be set up 5 sensitivity level, can meet the different needs of more occasions.
Product feature
  1. Built-in high speed, low power consumption, high performance 16-bit high-precision data processing chip.
  2. Using patent narrow-band IR sensor and solar blind UV sensor.

  3. The improvement of the algorithm improves the ability of flame detection and false alarm.

  4. Explosion-proof design is suitable for the hazardous locations of industrial site.

  5. Multistage sensitivity for more occasions.

  6. Can detect small fire much earlier.

  7. Low maintenance cost, easy to update and improvement.

  8. Detection Angle of 120 degrees.

  9. Suitable for heavy industrial applications.

  10. Detector is suitable for a variety of fuel.
    r consumption, high performance 16-bit high-precision data processing chip.

  11. Using patent narrow-band IR sensor and solar blind UV sensor.

  12. The improvement of the algorithm improves the ability of flame detection and false alarm.

  13. Explosion-proof design is suitable for the hazardous locations of industrial site.

  14. Multistage sensitivity for more occasions.

  15. Can detect small fire much earlier.

  16. Low maintenance cost, easy to update and improvement.

  17. Detection Angle of 120 degrees.

  18. Suitable for heavy industrial applications.

  19. Detector is suitable for a variety of fuel.

    • SPECIFICATIONS:


BK 02
รายละเอียดสินค้า

• Model : BK - 02
• Size : 100mm X 276mm
• Material : SUS316
• Weight : 280g
• Angluar adjustment : Vertical 180° ( Up90° Down90° )
                               Horizontal 180° ( Left90° Right90° )
This part makes enable to change direction of sensor up,down,left and right in 360° for correct sensing of sensor.


BK 01
รายละเอียดสินค้า

• Model : BK - 1
• Size : 70mm X 138mm
• Material : Aluminum(Diecasting), Nickel planting
• Weight : 280g
• Angluar adjustment : Vertical 180° ( Up90° Down90° )
                               Horizontal 180° ( Left90° Right90° )
This part makes enable to change direction of sensor up,down,left and right in 360° for correct sensing of sensor.


TEST LAMP -TL3000
รายละเอียดสินค้า
[Specifications]
• Operation distance : Average 4m
• Target Flame detector type : RFD-3000, RED-3000X only (Contact
   Rezontech, for more details.)
• Operation time : 2 hour
• Weight : about 3.2KG
• Dimension : 250mm X 145mm
• Enclosure : Aluminium(Anodizing Process)
• Operation Tep : 0°C~50°C • Storage Tep: -10°C~60°C
• Charging 
    1. Connect AC 220V plug of a charger to the receptacle.
    2. Fully discharged battery will be required Maximum 24hours
        recharging for the appropriate operation. 
        ※ Charge enough after usage.(Min. 16 hours)
        ※ LED Indicator (Red: recharging fault, Green: Fully charged)

 Caution : RFD-3000, RFD-3000X Only


TEST LAMP -TL205
รายละเอียดสินค้า

SPECIFICATION

• Model : TL205
• Size : 145mm x 250mm
• Material : Aluminum(Anodizing)
• Weight : About 3.2kg
• Test range : Average 7m
               

 


The tester can be used near by sensor that UV/IR type, usually.
 


IR3 FLAME DETECTOR -RFT-3FT
รายละเอียดสินค้า

• Type : Triple Infrared, Outdoor, Non explosion-proof, Particulate
• Nominal sensing range : 50m
• Sensing angle : 90°, Cone type
• Explosion-proof class : T6,IP67,IIC(Korea Gas Safety
  Corporation)
• Operating temp. :-40~+85℃
• Keeping temp. :-50~+90℃
• Humidity : 0~95%
• Output signal
  › RELAY
  › Fire : 5A(250VAC, 30VDC), A connect point
  › O.C (Open Collector)
    Fire : MAX DC 32V, 10mA
    Error : MAX DC 32V, 10mA
  › 4~20mA
  › RS485
• Fuction
  › Diagnostic sensor fault enable - Self test
  › Remote self diagnostic ON/OFF control ( BIT )
               



• Material : Aluminum 6061
• Surface : Anodizing Process
• Color : Red
• Weight : About 0.53㎏
• External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF
               



• Power Cunsumption : 3.9W
• Voltage : DC 24V,(17~30V, pulsating current enable)
• Current
  › Idel(Sensing) : 100mA
  › Fire(Activating, Emergency)(Sensing) : 120mA
  › Self test : 170mA
               


IR3 FLAME DETECTOR RFD-3000X
รายละเอียดสินค้า



• Type : Triple Infrared
• Detection Range : 200ft(60m(FM), 50m(KFI)) for n-Heptane fire
• Field of View : Horizontal 90°, Vertical 90°
• Temperature Range Operating : -40℃ to +75℃
• Storage : -50℃ to +80℃
• Humidity Range : 0 to 95% relative humidity
• Explosion proof :
  › Ex d IIB+H2 T5 IP66/67(KGS)
  › II 2G Ex db IIB+H2 T5 Ta= -40°C to 75°C IP66 / IP67(ATEX)
  › Class I Division 1 Groups B,C and D(FM)
  › Class II Division 1 Groups E,F and G(FM)
  › Class III (FM)
  › Ex dIIC T5 Gb DIP A21 TA, T5 IP67(NEPSI)
• Output
  › Relay
    - Fire Alarm, Fault Alarm, Warning Alarm
    - From A or B Selectable, 30vdc, 3A
  › 4-20mA
  › RS-485
               



• Dimensions : W134 x H117 x D112 mm
                    W5.3 x H4.6 x D4.3 Inch
• Enclosure Material : Stainless steel 316
• Shipping Weight : 7.5 kg
• Color : Metal
• Conduit Entry Size : 2 x 1/2 inch NPT, M 20X1.5
               



• Operating Voltage : Typical DC24V (18 to 30)
• Power Consumption : 4.5W maximum at 30 vdc
• Wiring : 14AWG(2.08mm2) to
              24AWG(0.205mm2) shielded
              cable recommended.
• Electromagnetic Compatibility : EMC Protected


UV/IR FLAME DETECTOR RFD-2FTN
รายละเอียดสินค้า

http://www.rezontech.com/eng/i/
• Type : Ultraviolet and Infrared, Outdoor, Explosion-proof
• Nominal sensing range : 30m
• Sensing angle : 100°, Cone type
• Operating temp. : -40 ~+85℃
• Keeping temp. :-50~+90℃
• Humidity : 0~95%
• Output signal
  › Relay
    Fire : 1A ( 250VAC, 30VDC ), A-B connect point
    Error : 1A ( 250VAC, 30VDC ), A-B connect point
  › 4~20mA
  › RS485
• Fuction
  › Diagnostic sensor fault enable - Self test
  › Remote self diagnostic ON/OFF control ( BIT )
                

http://www.rezontech.com/eng/i/


• Material : Aluminum 6061
• Surface : Anodizing Process
• Color : White silver
• Weight : About 0.53kg
• External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF
               

http://www.rezontech.com/eng/i/


• Power Cunsumption : 5.8W
• Voltage : DC 24V, ( 17~30V, pulsating current enable)
• Current
  › Idel(Sensing) :100mA
  › Fire(Activating, Emergency)(Sensing) : 120mA
  › Self test : 170mA

IR/UV FLAME DETECTOR RFD-2000X-H
รายละเอียดสินค้า
  • Specification 

• Type : Ultraviolet and Infrared, Hydrogen flame detector                              
• Detection Range : 100ft(30m) for n-Heptane fire
                            15ft(4.5m) for Hydrogen (30" plume)
• Field of View : Horizontal 90°, Vertical 90°
• Temperature Range Operating : -40℃ to +75℃
• Storage : -50℃ to +80℃
• Humidity Range : 0 to 95% relative humidity
• Explosion proof :
  › Class I Division 1 Groups B,C and D(FM)
  › Class II Division 1 Groups E,F and G(FM)
  › Class III (FM)
  › Ex d IIB+H2, T6(ATEX)
• Output
  › Relay
    - Fire Alarm, Fault Alarm, Warning Alarm
    - From A or B Selectable, 28vdc, 2A
  › 4-20mA
  › RS-485

http://www.rezontech.com/eng/i/
• Dimensions (body) : W134 x H117 x D120 mm
                              W5.3 x H4.6 x D4.7Inch
• Enclosure Material : Stainless steel 316
• Shipping Weight : 3.4 kg (with Bracket)
• Color : Metal
• Conduit Entry Size : 2 X 1/2 inch NPT, M20 X 1.5

http://www.rezontech.com/eng/i/


• Operating Voltage : Typical DC24V (17 to 32).
• Power Consumption : 1.8W maximum at 32 vdc
• Wiring : 14AWG(2.08mm2) to
              24AWG(0.205mm2) shielded
              cable recommended.
• Electromagnetic Compatibility : EMC Protected

UV/IR DETECTOR RFD-2000X
รายละเอียดสินค้า
Specification 

• Type : Ultraviolet and Infrared
• Detection Range : 100ft(30m(FM), 15m(KFI)) for N-Heptane fire
• Field of View : Horizontal 90°, Vertical 90°
• Temperature Range Operating : -40℃ to +75℃
• Storage : -50℃ to +80℃
• Humidity Range : 0 to 95% relative humidity
• Explosion proof :
  › Class I Division 1 Groups B,C and D(FM)
  › Class II Division 1 Groups E,F and G(FM)
  › Class III (FM)
  › Ex db IIB+H2 T6(ATEX, KGS)
• Output
  › Relay
    - Fire Alarm, Fault Alarm, Warning Alarm
    - From A or B Selectable, 28vdc, 2A
  › 4-20mA
  › RS-485

***STRUCTURE

• Dimensions : W134 x H117 x D120 (mm)
                     W5.3 x H4.6 x D4.7 (inch)
• Enclosure Material : Stainless steel 316
• Shipping Weight : 3.4 kg
• Color : Metal
• Conduit Entry Size : 2 x 1/2 inch PF

**ELECTRICAL 
• Operating Voltage : Typical DC24V (17 to 32)
• Power Consumption : 1.8W maximum at 32 vdc
• Wiring : 14AWG(2.08mm2) to
               24AWG(0.205mm2) shield
               cable recommended.
• Electromagnetic Compatibility : EMC Protected


Visitors: 29,054